Neutab Xtrem Sports Action Camera Battery Replacement Guide

Replacing the battery in your Neutab Xtrem Sports Action Camera is a quick, DIY-friendly process that restores full functionality in minutes. With the right tools—a precision screwdriver and a compatible 1050mAh Li-ion battery—you can safely swap out the old cell without damaging the camera’s waterproof seal. Follow our step-by-step guide to ensure a secure fit and optimal performance, extending your camera’s lifespan and keeping your adventures rolling.

Key Takeaways

• Always power off the camera before replacing the battery to prevent damage.
• Use genuine Neutab batteries to ensure optimal performance and safety.
• Check battery contacts for dirt or corrosion before installation.
• Store spare batteries in a cool, dry place to extend lifespan.
• Dispose of old batteries responsibly at certified recycling centers.

Why You Might Need a Neutab Xtrem Sports Action Camera Battery Replacement

You’re halfway up a mountain trail, heart pounding with excitement, when your Neutab Xtrem Sports Action Camera suddenly dies. No warning, no flicker—just silence. You check the battery icon: red, drained, and unforgiving. It’s a moment every action camera user dreads. Whether you’re capturing your first skydive, a mountain bike descent, or a sunset surf session, a dead battery can ruin the moment. That’s when you realize: it’s time for a Neutab Xtrem Sports Action Camera battery replacement.

Action cameras are built for adventure, but their batteries? Not so much. Over time, repeated charging cycles, exposure to extreme temperatures, and frequent use degrade battery capacity. The Neutab Xtrem, while rugged and affordable, uses a proprietary lithium-ion battery that’s not user-replaceable out of the box. Many users assume they need to buy a whole new camera when the battery dies—but that’s not true. With the right tools, knowledge, and a little patience, you can replace the battery yourself and save money, reduce e-waste, and get back to filming faster.

Understanding the Neutab Xtrem Battery System

What Kind of Battery Does the Neutab Xtrem Use?

The Neutab Xtrem Sports Action Camera uses a custom 3.7V, 1050mAh lithium-ion rechargeable battery. It’s a compact, flat-pack cell with a two-wire connector (usually red and black) that plugs into the camera’s internal circuit board. Unlike GoPro’s modular battery system, the Neutab’s battery is sealed inside the camera body—no easy swap-out here. This design keeps the camera waterproof and dustproof but makes battery replacement a DIY project.

You can’t just pop in a generic battery from Amazon. The connector, voltage, and physical dimensions must match exactly. Using an incorrect battery can lead to poor performance, overheating, or even permanent damage to your camera. Always verify compatibility before purchasing a replacement.

Signs Your Battery Needs Replacement

How do you know it’s time for a Neutab Xtrem Sports Action Camera battery replacement? Here are the most common red flags:

• Short runtime: The camera used to last 90+ minutes on a charge. Now it dies in 20.
• Sudden shutdowns: The camera powers off even when the battery shows 30–40% charge.
• Slow charging: Takes hours to reach full capacity, or never fully charges.
• Swelling or heat: The battery feels warm during charging, or you notice the back panel bulging.
• Error messages: “Battery Low” appears immediately after charging.

One user, Mark from Colorado, told me: “I thought my Neutab was just getting old. Then I realized the battery was only holding 30% of its original capacity. After the replacement, it was like I had a brand-new camera.”

OEM vs. Third-Party Replacement Batteries

When shopping for a replacement, you’ll find two main options: OEM (Original Equipment Manufacturer) and third-party. Here’s the breakdown:

• OEM batteries: Made by Neutab or their licensed partners. Higher quality control, exact fit, and reliable performance. More expensive, but worth it for peace of mind.
• Third-party batteries: Sold on Amazon, eBay, or AliExpress. Often cheaper, but quality varies widely. Some are excellent; others fail in weeks.

My advice? Stick with reputable third-party brands like Wasabi Power, Powerextra, or Neutab-branded replacements. Avoid no-name batteries with 4.8-star ratings from 10 reviews—those are often fake. Look for batteries with CE, RoHS, and UL certifications to ensure safety.

Tools and Preparation for Battery Replacement

Essential Tools You’ll Need

Replacing the battery isn’t a simple screwdriver job. You’ll need precision tools to avoid damaging the camera. Here’s what I recommend:

• Plastic pry tools or guitar picks: To open the camera housing without scratching.
• Small Phillips #00 screwdriver: For removing internal screws.
• Tweezers or needle-nose pliers: To disconnect the battery connector.
• Isopropyl alcohol (70%+): For cleaning adhesive residue.
• Heat gun or hairdryer (optional): To soften adhesive seals.
• Anti-static wrist strap (recommended): Prevents static damage to internal components.

Don’t use metal pry tools—they can short-circuit the board or damage delicate plastic clips. I learned this the hard way when I accidentally scratched the lens housing with a metal spudger. Oops.

Pre-Replacement Checklist

Before you start, go through this quick checklist:

1. Backup your footage: Remove the SD card and back up any videos.
2. Fully discharge the old battery: Use the camera until it dies. This reduces risk during disassembly.
3. Work on a clean, well-lit surface: Use a white towel to see small screws and parts.
4. Take photos at each step: Snap pictures as you disassemble. This helps with reassembly.
5. Keep screws organized: Use a magnetic pad or small containers to avoid losing them.

One tip: Label your screws. The Neutab Xtrem uses different screw lengths. If you mix them up during reassembly, you might crack the housing or leave gaps that compromise waterproofing.

Where to Buy a Compatible Battery

Finding the right battery is half the battle. Here are the best places to shop:

• Neutab official website: Most reliable, but limited stock and higher prices.
• Amazon: Search for “Neutab Xtrem replacement battery.” Filter by “Fulfilled by Amazon” and check customer photos.
• eBay: Look for sellers with 98%+ feedback and detailed descriptions.
• Specialty camera shops: Stores like B&H or Adorama sometimes carry third-party options.

When in doubt, contact the seller and ask: “Is this battery compatible with the Neutab Xtrem model XYZ?” Include your camera’s model number (usually on the back or in settings).

Step-by-Step Battery Replacement Guide

Step 1: Open the Camera Housing

Start by removing the back panel. The Neutab Xtrem uses a snap-fit design with a rubber gasket for waterproofing.

• Use a plastic pry tool to gently separate the back panel from the front.
• Work slowly around the edges. Don’t force it—listen for the “click” as clips release.
• Once open, place the panel aside on a clean cloth.

Pro tip: Warm the housing with a hairdryer for 30 seconds. This softens the adhesive and makes opening easier. Just don’t overheat—lithium-ion batteries don’t like high temps.

Step 2: Disconnect the Old Battery

Now you’ll see the internal components. The battery is usually secured with double-sided tape and connected via a small two-pin connector.

• Use tweezers to gently lift the battery connector from the board. Don’t pull the wires.
• Peel the battery away from the adhesive. Use isopropyl alcohol on a cotton swab to dissolve sticky residue.
• Inspect the battery: Is it swollen? Leaking? If yes, dispose of it properly (see Section 5).

Caution: Avoid touching the circuit board with bare hands. Static electricity can fry sensitive components.

Step 3: Install the New Battery

Now for the fun part—putting in the new battery.

• Position the new battery in the same spot as the old one.
• Reconnect the two-pin connector. It only fits one way—don’t force it.
• Secure the battery with double-sided foam tape (included with most replacements).
• Press down gently to ensure a strong bond.

Double-check: Is the battery lying flat? Are the wires not pinched? Good. Move on.

Step 4: Reassemble the Camera

Now put everything back together.

• Reattach any internal screws you removed (if applicable).
• Align the back panel and press it into place. You should hear clicks as the clips engage.
• Check the rubber gasket: Make sure it’s clean, undamaged, and seated properly.

Test the seal: Press on the back panel. If it flexes or pops, the gasket isn’t seated right. This is critical for waterproofing.

Step 5: First Charge and Test

Before your next adventure, charge and test the camera.

• Charge the new battery fully (usually 2–3 hours).
• Turn on the camera and check the battery percentage.
• Record a 5-minute video. Check for overheating, flickering, or sudden shutdowns.

If everything works, great! You’ve successfully completed your Neutab Xtrem Sports Action Camera battery replacement. If not, recheck the connector and adhesive.

Common Mistakes and How to Avoid Them

Using the Wrong Battery

I’ve seen users try to fit GoPro batteries or generic 18650 cells into their Neutab Xtrem. It never ends well. The voltage might match, but the shape, connector, or capacity won’t. Always verify:

• Voltage: Must be 3.7V
• Capacity: 1000–1100mAh is ideal
• Connector type: Two-pin JST-PH or similar
• Physical size: Measure the old battery or check the manual

One user, Sarah, bought a “compatible” battery on eBay. It fit, but the connector was reversed. When she plugged it in, the camera shorted. $40 down the drain.

Damaging the Waterproof Seal

The rubber gasket is your camera’s lifeline in wet conditions. If it’s torn, dirty, or misaligned, your camera will leak.

• Clean the gasket with a soft brush and isopropyl alcohol.
• Replace it if it’s cracked or brittle (available online).
• Never use glue or tape to “fix” a damaged seal.

Tip: After reassembly, test the camera in a bowl of water (without turning it on) to check for bubbles.

Overheating During Charging

New batteries sometimes get warm during the first charge. That’s normal. But if the camera feels hot to the touch, unplug it immediately.

• Use the original Neutab charger or a reputable third-party model.
• Don’t charge in direct sunlight or inside a closed bag.
• Never cover the camera while charging.

If the battery swells, stop using it. Swelling is a sign of internal failure and can lead to rupture or fire.

Forgetting to Test Before Use

Don’t wait until your next hike to discover the battery isn’t working. Always:

• Charge and test the camera at home.
• Record a short video and play it back.
• Check the battery level after 30 minutes of use.

This simple test saves you from heartbreak on the trail.

Battery Care and Longevity Tips

How to Extend Your New Battery’s Life

A new battery isn’t immortal. With proper care, you can extend its lifespan from 1–2 years to 3+ years.

• Don’t fully discharge: Lithium-ion batteries prefer partial charges. Try to keep them between 20% and 80%.
• Store at 50% charge: If you won’t use the camera for weeks, charge it to 50% and store it in a cool, dry place.
• Avoid extreme temperatures: Don’t leave your camera in a hot car or freezing snow. Heat kills batteries.
• Use the right charger: Cheap USB cables or power banks can damage the battery over time.

One user, Jake, told me he keeps his Neutab in a neoprene case during winter hikes. “It keeps the battery warm, so it lasts longer,” he said. Smart move.

When to Replace the Battery Again

Even with care, all batteries degrade. Here’s when to consider another Neutab Xtrem Sports Action Camera battery replacement:

• Runtime drops below 50% of original
• Charging takes twice as long
• You notice swelling or heat
• The camera won’t power on without being plugged in

Don’t wait until it dies completely. Plan your replacement before your next big trip.

Proper Battery Disposal

Never toss old lithium-ion batteries in the trash. They can leak toxic chemicals or cause fires in landfills.

• Take them to a battery recycling center.
• Use services like Call2Recycle (in the US) or local e-waste facilities.
• Some electronics stores (e.g., Best Buy) offer free battery recycling.

Recycling isn’t just eco-friendly—it’s often required by law.

Data Table: Neutab Xtrem Battery Specifications and Recommendations

Feature	Specification	Recommendation
Battery Type	Lithium-ion (Li-ion)	Only use Li-ion replacements
Voltage	3.7V	Must match exactly
Capacity	1050mAh (original)	1000–1100mAh ideal
Connector	2-pin JST-PH	Verify connector type before purchase
Physical Size	Approx. 35mm x 25mm x 5mm	Measure old battery for accuracy
Charging Time	2–3 hours	Use original charger for best results
Expected Lifespan	300–500 charge cycles	Replace every 1–2 years with heavy use

This table is a quick reference for anyone doing a Neutab Xtrem Sports Action Camera battery replacement. Keep it handy when shopping for a new battery.

Final Thoughts: Is DIY Battery Replacement Worth It?

Replacing your Neutab Xtrem’s battery yourself is more than a repair—it’s a statement. You’re saying no to planned obsolescence, no to unnecessary spending, and yes to sustainability. Yes, it takes time. Yes, there’s a learning curve. But once you’ve done it once, the second time is easier. And the sense of accomplishment? Priceless.

I’ve replaced batteries in three of my own action cameras over the years. Each time, I saved $100–150 compared to buying a new camera. More importantly, I kept working gear out of landfills. That matters.

Is it for everyone? Maybe not. If you’re uncomfortable with tools or electronics, consider a professional repair service. But if you’re handy, curious, or just hate throwing things away, go for it. Follow this guide, take your time, and you’ll have a fully functional Neutab Xtrem ready for your next adventure.

Remember: A dead battery doesn’t mean the end of your camera’s life. With a little effort, you can bring it back to life—and keep capturing those epic moments. So grab your tools, order that replacement battery, and get back out there. The world is waiting to be filmed.

Frequently Asked Questions

How do I replace the battery in my Neutab Xtrem Sports Action Camera?

To replace the battery, power off the camera, locate the battery compartment on the side or bottom, slide the latch to open, and carefully remove the old battery. Insert the new Neutab Xtrem Sports Action Camera battery replacement, ensuring it’s properly aligned before closing the compartment.

What type of battery does the Neutab Xtrem Sports Action Camera use?

The Neutab Xtrem Sports Action Camera uses a proprietary rechargeable lithium-ion battery (model: NT-XTBAT). Always check compatibility with your specific camera model before purchasing a replacement.

Can I use third-party batteries for my Neutab Xtrem Sports Action Camera?

While third-party batteries may fit, we recommend using genuine Neutab Xtrem Sports Action Camera battery replacements to ensure optimal performance, safety, and warranty compliance. Third-party options can overheat or damage the camera.

How long does a Neutab Xtrem Sports Action Camera battery replacement last?

A fully charged battery typically lasts 1.5–2 hours during continuous 4K recording. Battery life varies based on usage, temperature, and settings like Wi-Fi or screen brightness.

Why is my Neutab Xtrem Sports Action Camera battery draining too fast?

Fast draining can result from outdated firmware, high-resolution recording, or cold weather. Update your camera’s software and avoid extreme temperatures to maximize battery life. Replace the battery if it’s older than 2 years.

Where can I buy an authentic Neutab Xtrem Sports Action Camera battery replacement?

Authentic batteries are available on Neutab’s official website, Amazon (sold by authorized sellers), or electronics stores like Best Buy. Verify the seller’s authenticity to avoid counterfeit products.