Dragon Touch Action Camera How to Charge Batteries Guide

Charging your Dragon Touch action camera battery correctly is essential for peak performance and longevity. Always use the included USB cable and a 5V/1A power source—avoid fast chargers to prevent overheating and damage. For best results, power off the camera while charging and never leave batteries plugged in overnight.

Key Takeaways

• Use the right charger: Always use the included Dragon Touch charger to avoid damage.
• Charge fully before first use: Maximize battery life with a complete initial charge.
• Monitor charging time: Avoid overcharging—unplug after 2-3 hours for safety.
• Store batteries properly: Keep in a cool, dry place when not in use.
• Check battery contacts: Clean regularly to ensure efficient charging and performance.
• Carry spares for trips: Always pack extra batteries for extended shooting sessions.

Why Charging Your Dragon Touch Action Camera Batteries Matters

So, you’ve just unboxed your shiny new Dragon Touch action camera—maybe the DT80, DT90, or the popular Vision 3 Pro—and you’re ready to capture your next mountain biking adventure, snorkeling trip, or family vacation. You press record, and… nothing. The battery’s dead. Or worse, you’re halfway through a hike and your camera powers off mid-shot. Sound familiar? I’ve been there. It’s frustrating, especially when you’re counting on your camera to preserve those once-in-a-lifetime moments.

Here’s the good news: Charging your Dragon Touch action camera batteries doesn’t have to be a mystery. Whether you’re a first-time action cam user or upgrading from another brand, understanding how to charge, store, and maintain your batteries can save you from those dreaded “low battery” warnings. In this guide, I’ll walk you through everything you need to know—step by step—from plugging in the charger to extending battery life with smart habits. Think of it as a friendly chat over coffee, sharing real-world tips I’ve learned after using my Dragon Touch for over two years.

Understanding Your Dragon Touch Camera Battery System

Types of Batteries Used in Dragon Touch Models

Not all Dragon Touch action cameras use the same battery. It’s important to know which model you have so you can use the correct charging method and avoid damaging your gear. Most models—like the Vision 3 Pro, DT80, and DT90—use a rechargeable lithium-ion battery (typically 1050mAh to 1350mAh). These are removable, which is a big plus for action photographers who want to carry spares.

For example, the Vision 3 Pro uses a DC 3.7V 1050mAh battery. The DT90, on the other hand, often comes with a slightly larger 1350mAh battery. Some older or budget models may have built-in batteries, but the vast majority of Dragon Touch cameras today use swappable batteries. This means you can charge one while using another—perfect for long shooting days.

What Comes in the Box (and What Doesn’t)

When you open your Dragon Touch box, you’ll typically find:

• One action camera
• One rechargeable battery (sometimes two, depending on the bundle)
• A USB charging cable (usually micro-USB or USB-C)
• A battery charger (optional—some kits include a dual-slot dock)
• Mounts, housing, and accessories

Here’s a common surprise: Not all kits include a wall adapter. That means you might be using your phone charger or a laptop to power the camera or charger dock. While that works, I recommend using a 5V/2A wall adapter (like the one from your phone) for faster, more reliable charging. I learned this the hard way when I tried charging with a weak USB port on my old laptop—took over 6 hours!

How Long Does a Battery Last?

A fully charged Dragon Touch battery typically lasts:

• 90–120 minutes of continuous 1080p recording
• 60–90 minutes at 4K (higher resolution drains faster)
• Less if you’re using Wi-Fi, screen, or image stabilization

For example, I once recorded a 2-hour bike ride at 1080p with image stabilization on. My battery died at the 105-minute mark. So, if you’re planning a full-day shoot, bring at least two extra batteries. I now keep a set of three: one in the camera, one charging, and one in my bag.

How to Charge Dragon Touch Batteries: Step-by-Step Methods

Method 1: Charging Inside the Camera (Using USB)

This is the most common and convenient way to charge your Dragon Touch action camera battery. It’s perfect for when you’re at home, in a hotel, or near a power source.

Steps:

1. Insert the battery into your camera (make sure it clicks in securely).
2. Turn the camera off (charging is faster when the camera isn’t running).
3. Connect the included USB cable to the camera’s port (micro-USB or USB-C).
4. Plug the other end into a power source: wall adapter, power bank, or laptop.
5. The LED on the camera will light up red (charging) and turn blue or green when fully charged.

Pro tip: I always charge my camera overnight when I’m not using it. That way, it’s ready to go the next day. But don’t leave it plugged in for more than 24 hours—overcharging can reduce battery lifespan over time.

Real-life example: On a recent camping trip, I charged my DT80 using a 20,000mAh power bank. It took about 2.5 hours, and I still had 70% power left in the bank for my phone. Super handy!

Method 2: Using a Separate Battery Charger (Dual-Slot Dock)

If your Dragon Touch kit includes a battery charging dock (like the dual-slot version), you can charge batteries outside the camera. This is ideal if you have multiple batteries or want to keep your camera ready for use while charging.

Steps:

1. Place the battery into the charging dock slot (align the gold contacts).
2. Connect the dock to a power source using the USB cable and wall adapter.
3. The LED on the dock will show red (charging) and green (charged).
4. Most docks charge one battery at a time, but dual-slot models can charge both simultaneously.

Why I love this method: I keep a spare battery in my camera bag, and the other in the dock at home. When I get back from a shoot, I pop the used battery into the dock and swap in the fresh one. No downtime.

Note: If you don’t have a dock, you can buy a third-party dual-slot charger for around $15–$20. Just make sure it’s compatible with your battery model (check the label on the battery for voltage and size).

Method 3: Charging via Power Bank (On-the-Go)

Out hiking, biking, or at the beach? A power bank is your best friend. I use a 5V/2A power bank to charge my camera or battery dock while on the move.

Steps:

1. Ensure your power bank has enough charge (at least 50% for a full camera charge).
2. Connect the USB cable from the power bank to your camera or charging dock.
3. Wait for the LED to turn green—this usually takes 2–3 hours.

Tip: Use a power bank with a pass-through charging feature. That means you can charge the power bank and use it to power your camera at the same time. I’ve used this trick at music festivals to keep my camera running all day.

Method 4: Solar Charging (For Extended Outdoor Use)

If you’re into backpacking or off-grid adventures, consider a portable solar charger (like the Anker PowerPort Solar). While it’s slower than wall charging, it can keep your batteries topped up during long trips.

How it works:

• Set up the solar panel in direct sunlight.
• Connect it to your power bank, which then charges your camera or dock.
• Expect 4–6 hours of charging time, depending on sun intensity.

My experience: I tried this on a 5-day hike. It didn’t fully charge my battery, but it kept it at 70–80%, which was enough for short clips each day. Not ideal for heavy users, but great for light recording.

Battery Charging Best Practices and Safety Tips

Don’t Overcharge: Why It Matters

Lithium-ion batteries don’t like being left plugged in indefinitely. While modern Dragon Touch cameras have built-in overcharge protection, it’s still best to unplug them once fully charged. Why? Because constant heat and voltage stress can degrade the battery over time, reducing its capacity.

What I do: I set a timer on my phone when charging. When the battery hits 100%, I unplug it. Simple, but effective. After two years of this habit, my battery still holds 85% of its original capacity.

Store Batteries Properly

When you’re not using your Dragon Touch action camera batteries for a while (like during winter), store them right. Here’s how:

• Charge them to 40–60% before storing.
• Keep them in a cool, dry place (not in a hot car or humid basement).
• Avoid direct sunlight or extreme temperatures.
• Recharge every 3–6 months to prevent deep discharge.

I keep my spare battery in an anti-static bag inside a small plastic case. It’s survived two cross-country moves with no issues.

Use the Right Charger and Cable

Not all USB cables are created equal. A cheap, thin cable might not deliver enough power, leading to slow or failed charging. Always use the original cable or a high-quality third-party one with good reviews.

Red flags to watch for:

• Charging takes longer than 3 hours
• Battery gets unusually hot
• Camera won’t power on even after charging

If you see these, try a different cable or power source. I once used a frayed cable from my old tablet—took 5 hours to charge and damaged the battery port. Lesson learned!

Monitor Battery Temperature

Your battery should feel slightly warm during charging. If it’s hot to the touch, unplug it immediately. Overheating can be dangerous and shorten battery life.

Safe charging conditions:

• Room temperature (60–75°F / 15–24°C)
• No flammable materials nearby
• On a non-metallic, non-conductive surface

Troubleshooting Common Charging Problems

Battery Not Charging? Here’s What to Try

You plug in your camera, but the LED doesn’t light up. Don’t panic—here are the most common fixes:

• Check the battery contacts: Wipe them with a clean, dry cloth. Dust or corrosion can prevent charging.
• Try a different USB port: Sometimes the port on your computer is weak. Use a wall adapter instead.
• Swap the cable: Test with a known-working cable.
• Remove the battery and reinsert it: It might not be seated properly.
• Reset the camera: Turn it off, remove the battery for 30 seconds, reinsert, and try again.

My story: Once, my DT90 wouldn’t charge. I tried everything—new cable, wall adapter, even a different battery. Turned out the micro-USB port was slightly loose. A quick wiggle and it started charging. Not ideal, but it worked.

Charging Takes Too Long

If charging takes more than 4 hours, check:

• Are you using a 5V/1A or 5V/2A power source? The latter is faster.
• Is the camera turned off? Charging slows if it’s on.
• Is the battery old? Batteries lose capacity over time. After 2–3 years, you might need a replacement.

Battery Drains Fast After Charging

If your battery dies in 30 minutes, it might be:

• Old and worn out (replace it)
• Damaged from overheating or over-discharging
• Used in cold weather (batteries drain faster below 40°F / 4°C)

I once recorded in -10°F weather. My battery died in 20 minutes. Once I warmed it up, it held a charge again—but I learned to keep spares in my jacket pocket to keep them warm.

Data Table: Charging Times and Battery Specs by Model

Model	Battery Capacity	Charging Method	Avg. Charging Time (Wall)	Charging Time (Power Bank)	Notes
Dragon Touch Vision 3 Pro	1050mAh	In-camera or dock	2–2.5 hours	2.5–3 hours	Uses micro-USB
Dragon Touch DT80	1350mAh	In-camera or dock	2.5–3 hours	3–3.5 hours	Larger battery, longer life
Dragon Touch DT90	1350mAh	In-camera or dock	2.5–3 hours	3–3.5 hours	USB-C available in newer versions
Dragon Touch Vision 4 (older)	1000mAh	In-camera only	2–2.5 hours	2.5–3 hours	No dock support

Note: Times may vary based on power source quality and ambient temperature.

Conclusion: Keep Your Shots Rolling with Smart Charging Habits

Charging your Dragon Touch action camera batteries isn’t rocket science—but doing it right makes all the difference between capturing a perfect moment and missing it entirely. Whether you’re charging inside the camera, using a dock, or relying on a power bank in the wild, the key is consistency, safety, and preparation.

From my experience, the best approach is to always have a plan. Know your battery life, carry spares, and use high-quality chargers. Store batteries properly, avoid extreme temperatures, and don’t leave them plugged in overnight. These small habits add up to longer battery life and fewer headaches.

And remember: your camera is only as good as its power source. Invest in a good charging dock, keep a power bank in your bag, and treat your batteries with care. That way, when the adventure calls, your Dragon Touch action camera will be ready to roll—fully charged and fully capable.

Now go out there, hit record, and don’t let a dead battery ruin your story. Happy shooting!

Frequently Asked Questions

How do I charge my Dragon Touch action camera battery?

To charge your Dragon Touch action camera battery, connect the USB cable to the camera or battery dock, then plug it into a power source like a wall adapter or computer. The camera’s LED light will indicate charging status (red for charging, green for fully charged).

Can I use a third-party charger for my Dragon Touch action camera?

While it’s recommended to use the original Dragon Touch charger or USB cable for safety, third-party chargers with matching voltage (5V) and USB output should work. Avoid fast chargers to prevent battery damage.

How long does it take to fully charge a Dragon Touch action camera battery?

Most Dragon Touch batteries take 2-3 hours to fully charge via a standard USB port or wall adapter. Charging time may vary slightly depending on the battery capacity and power source strength.

Is it safe to charge my Dragon Touch camera battery overnight?

Yes, the Dragon Touch action camera has built-in overcharge protection. Once fully charged, the LED turns green and stops charging automatically, making overnight charging safe.

Why isn’t my Dragon Touch camera charging when plugged in?

If your camera isn’t charging, first check the USB cable, port, and power source. Try resetting the camera or cleaning the battery contacts. If issues persist, the battery may need replacement.

Can I charge my Dragon Touch action camera while using it?

Yes, you can power the camera via USB while recording, but the battery won’t charge during use. For continuous operation, connect to a power bank or wall outlet using the USB cable.