DJI FPV Action Camera Mount Ultimate Guide for Secure Setup

The DJI FPV Action Camera Mount delivers unshakable stability for high-speed aerial filming, engineered specifically for seamless compatibility with DJI’s FPV ecosystem. Its rugged, vibration-dampening design ensures crisp, professional-grade footage even in extreme flight conditions, making it a must-have for serious drone cinematographers.

Key Takeaways

• Choose the right mount type: Match your camera and drone model for a secure fit.
• Ensure tight fastening: Double-check screws and clamps to prevent mid-flight detachment.
• Balance weight distribution: Avoid affecting drone stability with uneven camera placement.
• Use vibration dampeners: Reduce jello effect for smoother, professional-quality footage.
• Test before flying: Perform a pre-flight check to confirm mount security and camera alignment.
• Protect the lens: Install a lens hood or filter to prevent damage and glare.

Why the DJI FPV Action Camera Mount Matters for Your Aerial Adventures

Imagine soaring through the sky, your drone slicing through crisp mountain air, capturing every heart-pounding moment in ultra-HD. Now, imagine losing your action camera mid-flight because the mount failed. That’s not just a bummer—it’s a disaster. Whether you’re an adrenaline junkie chasing the next epic FPV (First-Person View) flight or a content creator building your drone videography portfolio, the right DJI FPV action camera mount is your silent guardian. It’s not just about holding your gear; it’s about peace of mind, safety, and ensuring your footage stays intact.

But here’s the thing: not all mounts are created equal. Some are flimsy, others are overly complex, and a few just don’t play nice with your specific DJI setup. After years of testing everything from DIY solutions to premium kits, I’ve learned that the right mount can make or break your flight experience. In this guide, I’ll walk you through everything you need to know to choose, install, and optimize your DJI FPV action camera mount—without the fluff, just real talk from someone who’s been there.

Understanding the DJI FPV Action Camera Mount: What It Is and Why You Need It

Let’s start with the basics. The DJI FPV action camera mount is a hardware accessory designed to securely attach your action camera (like the DJI Action 2 or GoPro) to your DJI FPV drone, goggles, or even a handheld rig. It’s not just a clamp—it’s a precision-engineered solution that balances weight, vibration, and aerodynamics. Without it, you risk shaky footage, damaged gear, or worse, a mid-air loss.

How It Differs from Generic Action Camera Mounts

Sure, you could slap a $10 GoPro mount on your drone and call it a day. But DJI’s ecosystem is unique. Here’s why a dedicated DJI FPV action camera mount stands out:

• Weight distribution: DJI mounts are designed to keep your drone balanced. Generic mounts often add unnecessary weight or throw off the center of gravity, affecting flight performance.
• Vibration dampening: DJI’s mounts include rubberized pads or silicone inserts to reduce high-frequency vibrations that can ruin your footage.
• Compatibility: DJI mounts are tested with their drones, goggles, and cameras. Third-party mounts might not fit securely, leading to wobble or detachment.

For example, I once used a cheap universal mount on my DJI FPV drone. Mid-flight, the camera started vibrating so badly that the video was unusable. After switching to a DJI-branded mount, the difference was night and day—smoother, cleaner, and no more shaky cam.

When You Absolutely Need a Mount (And When You Might Skip It)

Not every flight requires an action camera. But here are scenarios where a mount is non-negotiable:

• FPV racing: You need a forward-facing camera to record your line of sight while flying through gates.
• Freestyle tricks: Capturing barrel rolls or dives in 4K requires a secure, low-vibration setup.
• Content creation: If you’re filming for YouTube or social media, a stable mount ensures professional-grade footage.
• Backup recording: Some pilots use action cams as a secondary recorder in case the drone’s main camera fails.

On the flip side, if you’re just doing casual cruising or using the drone’s built-in camera for everything, you might skip the extra mount. But for serious flying? It’s a must-have.

Top DJI FPV Action Camera Mount Options: A Detailed Comparison

DJI and third-party brands offer a range of mounts, each with pros and cons. Here’s a breakdown of the most popular options, based on real-world testing and user feedback.

DJI Official FPV Action Camera Mount (For Goggles)

The gold standard for DJI pilots. This mount attaches to the DJI FPV Goggles V2 or Goggles 2, letting you record your POV while flying. It’s made of lightweight plastic with a quick-release mechanism.

• Pros: Perfect fit, easy to install, minimal vibration.
• Cons: Limited adjustability (angle is fixed), not compatible with older goggles.

Pro tip: Pair it with the DJI Action 2 for seamless recording. The magnetic design snaps into place in seconds.

DJI FPV Drone Action Camera Mount (Front-Facing)

Designed for the DJI FPV Drone, this mount sits on the front arm or canopy. It’s ideal for forward-facing shots or as a backup camera.

• Pros: Secure 3-point screw system, vibration-dampening rubber pads.
• Cons: Slightly heavier than third-party options, requires tools for installation.

Real-world example: I used this mount during a mountain fly-through. The camera stayed rock-steady even at 100 km/h.

Third-Party Aluminum Mounts (e.g., Runcam, Foxeer)

Brands like Runcam and Foxeer offer rugged aluminum mounts with adjustable angles. These are popular among FPV racers.

• Pros: Ultra-durable, 360-degree swivel, works with GoPro or DJI cameras.
• Cons: Adds weight (50-100g), may not dampen vibrations as well as DJI’s rubberized mounts.

Warning: Some third-party mounts block the drone’s front LED or interfere with the camera’s field of view. Always test before flying.

DIY 3D-Printed Mounts

For the tinkerers out there, 3D-printed mounts (available on Thingiverse or Printables) are a budget-friendly option.

• Pros: Customizable, lightweight, cheap.
• Cons: Less durable, may break under stress, no warranty.

My experience: I printed a mount once, but it cracked after a hard landing. Save DIY for non-critical flights.

Data Table: DJI FPV Action Camera Mount Comparison

Mount Type	Compatibility	Weight	Vibration Dampening	Price Range	Best For
DJI Official (Goggles)	DJI Goggles V2/2	12g	Excellent	$20-$30	POV recording, beginners
DJI Official (Drone)	DJI FPV Drone	25g	Excellent	$30-$40	Front-facing shots, backup recording
Runcam Aluminum	GoPro/DJI	65g	Good	$40-$60	FPV racing, extreme durability
3D-Printed (PLA)	Custom	10-15g	Poor	$5-$10	Budget builds, prototypes

Step-by-Step: How to Install Your DJI FPV Action Camera Mount

Installing a mount might seem straightforward, but a few small mistakes can lead to big problems. Here’s how to do it right, whether you’re using a DJI official mount or a third-party option.

Tools You’ll Need

• Small Phillips screwdriver (for DJI mounts)
• Hex keys (for third-party aluminum mounts)
• Rubber or silicone tape (optional, for extra grip)
• Camera (DJI Action 2, GoPro, etc.)

Installing the DJI Official Drone Mount

1. Locate the mounting points: On the DJI FPV drone, there are two threaded holes on the front canopy and one on the lower arm.
2. Attach the base plate: Use the provided screws to secure the base plate to the front canopy. Don’t overtighten—just snug enough to prevent wobble.
3. Add the rubber pads: Stick the included rubber pads to the base plate. These reduce vibration.
4. Snap in the camera: If using a DJI Action 2, the magnetic mount will click into place. For other cameras, use the quick-release adapter.
5. Test the fit: Gently wiggle the camera. It should move slightly but not rattle.

Pro tip: Apply a tiny drop of threadlocker (like Loctite) to the screws if you’re flying in windy conditions.

Attaching to DJI Goggles (V2 or G2)

1. Align the mount: The goggles’ mount has a specific orientation. Match the arrows on the mount and goggles.
2. Press and lock: Push the mount onto the goggles until you hear a click.
3. Insert the camera: For DJI Action 2, just snap it in. For other cameras, use the adapter.
4. Adjust the angle: While the angle is fixed, you can tilt the goggles up/down to change the shot.

Warning: Don’t force the mount. If it doesn’t click, double-check the orientation.

Installing Third-Party Aluminum Mounts

1. Check clearance: Ensure the mount won’t hit the drone’s propellers or block sensors.
2. Use the right screws: Most kits include multiple screw lengths. Choose the ones that fit snugly without protruding.
3. Add rubber tape: Wrap the contact points with tape to reduce vibration.
4. Test before flying: Power on the drone and check if the camera stays steady during a pre-flight check.

Real-world example: I once skipped the rubber tape on a Runcam mount. The camera vibrated so much that the footage looked like a horror movie.

Pro Tips for a Secure and Stable Setup

Even the best mount won’t save you if your setup has hidden flaws. Here are insider tips to ensure your action camera stays put and your footage stays smooth.

Balance Your Drone’s Weight

Adding an action camera changes your drone’s center of gravity. Here’s how to compensate:

• Move the battery back: Slide the battery toward the rear to counterbalance a front-facing camera.
• Check the flight controller: In the DJI FPV app, run an IMU calibration after installing the mount.
• Test hover: Lift the drone and let it hover. If it leans forward/backward, adjust the camera position or battery.

Reduce Vibration for Cinematic Footage

Vibration ruins footage, even with a good mount. Try these fixes:

• Use rubberized mounts: DJI’s official mounts have built-in dampening. For third-party mounts, add silicone tape.
• Enable electronic stabilization: If your camera supports it (like DJI Action 2), turn on EIS.
• Fly in Sport mode: The drone’s built-in stabilization is better in Sport mode than in Manual mode.

My trick: I stick a small piece of foam between the camera and mount for extra cushioning. Works like a charm!

Secure the Camera (No Mid-Flight Loss!)

Nothing’s worse than losing your camera mid-flight. Prevent it with:

• Safety tethers: Attach a thin, strong string from the camera to the drone. If the mount fails, the camera won’t fall.
• Double-check screws: Looseness is the #1 cause of mount failures. Tighten screws before every flight.
• Avoid extreme angles: Mounts aren’t designed for 90-degree tilts. Keep the camera within 30-45 degrees of horizontal.

Weatherproofing for Outdoor Flights

Rain, dust, and wind can ruin your gear. Protect your setup with:

• Silicone covers: Cover the camera’s ports and buttons with waterproof tape.
• Lens hoods: Reduce glare and protect the lens from scratches.
• Fly in dry conditions: Avoid flying in heavy rain, even with waterproof cameras.

Common Mistakes to Avoid (And How to Fix Them)

Even experienced pilots make these mistakes. Learn from my blunders so you don’t repeat them.

Overloading the Drone

Adding a heavy camera or mount can push your drone past its weight limit. Symptoms include:

• Reduced flight time
• Difficulty in sharp turns
• Increased battery drain

Fix: Weigh your setup before flying. The DJI FPV drone max payload is ~150g. A camera + mount should stay under 100g.

Ignoring Wind Resistance

A bulky mount creates drag, making the drone slower and less stable in wind.

• Symptom: The drone struggles to maintain altitude or drifts sideways.
• Fix: Use low-profile mounts (like the DJI official goggles mount) for windy conditions.

Misaligned Camera

An off-center camera can cause blurry footage or uneven framing.

• Symptom: The horizon is tilted in your videos.
• Fix: Use a level app on your phone to align the camera before flying.

Skipping Pre-Flight Checks

Always do this checklist before takeoff:

• Are the screws tight?
• Is the camera charged?
• Is the mount wobbling?
• Is the drone balanced?

Final Thoughts: Choosing the Right Mount for Your Needs

The DJI FPV action camera mount isn’t just a piece of plastic or metal—it’s your ticket to capturing breathtaking, stable footage without the stress of gear failure. Whether you’re a beginner looking for a plug-and-play solution or a pro demanding maximum durability, there’s a mount out there for you. My advice? Start with DJI’s official mounts for reliability, then experiment with third-party options as you grow. And always, always double-check your setup before every flight.

Remember, the best mount is the one you trust. So take your time, test different options, and find what works for your flying style. Happy flying—and may your footage always be smooth, sharp, and unforgettable!

Frequently Asked Questions

What is the DJI FPV Action Camera Mount used for?

The DJI FPV Action Camera Mount is designed to securely attach action cameras to the DJI FPV drone, enabling high-quality aerial footage recording. It ensures stable and vibration-free video capture during high-speed flights.

Which cameras are compatible with the DJI FPV Action Camera Mount?

The mount is compatible with popular action cameras like the DJI Action 2, DJI Osmo Action, and other similarly sized models. Always check dimensions and weight limits to ensure a proper fit.

How do I install the DJI FPV Action Camera Mount?

Installation is simple: attach the mount to the top of the DJI FPV drone using the provided screws and secure your action camera into the clamp. Ensure all connections are tight before flight to prevent detachment.

Is the DJI FPV Action Camera Mount durable?

Yes, the mount is made from high-strength, lightweight materials that withstand high-speed impacts and vibrations. It’s built to endure the rigors of FPV flying while keeping your camera safe.

Can I use the DJI FPV Action Camera Mount in all weather conditions?

While the mount itself is weather-resistant, it’s best used in dry conditions to protect your camera. Avoid flying in heavy rain or extreme humidity to maintain both drone and camera performance.

Does the DJI FPV Action Camera Mount affect drone flight performance?

The mount adds minimal weight and drag, so it has little impact on flight performance. However, ensure your total payload stays within the drone’s recommended limits for optimal stability and battery life.