How to Change Crosstour Action Camera Battery in Minutes

Changing your Crosstour action camera battery takes just minutes with this simple, step-by-step guide—no tools required. Ensure uninterrupted adventures by mastering the quick release mechanism and always carrying a charged spare for seamless swaps on the go.

Key Takeaways

• Power off first: Always turn off the camera before battery removal.
• Use genuine batteries: Ensure compatibility and safety with Crosstour models.
• Slide, don’t force: Gently slide the battery door to avoid damage.
• Check contacts: Clean terminals regularly for consistent power delivery.
• Store properly: Keep spare batteries in a cool, dry place.
• Time it right: Replace before full drain to prolong battery lifespan.

Why Changing Your Crosstour Action Camera Battery Matters

You’ve just returned from an epic mountain biking session, your adrenaline still pumping, and you’re eager to relive those breathtaking downhill turns. You pop open your Crosstour action camera, only to find the battery is completely drained. Frustration sets in—especially when you realize you don’t have a spare charged battery. Sound familiar?

Whether you’re capturing a sunrise hike, a surf session, or a family camping trip, the last thing you want is for your camera to die mid-adventure. The good news? Changing the battery on your Crosstour action camera is quick, simple, and something anyone can do—even if you’re not tech-savvy. With just a few minutes and the right tools (spoiler: you probably already have them), you can swap out the old battery for a fresh one and get back to filming in no time.

In this guide, I’ll walk you through the entire process of changing your Crosstour action camera battery, step by step. From identifying the right battery to storing spares safely, you’ll learn how to keep your camera powered and ready for action. No jargon, no fluff—just practical, real-world advice based on my own experiences and common issues users face.

Understanding Your Crosstour Action Camera Model and Battery Type

Identifying Your Crosstour Camera Model

Before you even think about replacing the battery, you need to know which Crosstour camera you have. Crosstour offers several models, including the CT7000, CT8500, CT9500, and the newer CT10000 series. Each model uses a slightly different battery design, and using the wrong one can damage your camera or lead to poor performance.

To identify your model:

• Check the label on the back or bottom of your camera.
• Look at the original packaging or user manual.
• If you’ve lost both, visit the Crosstour website and match the camera’s design, screen size, and button layout to the product images.

For example, the CT7000 has a compact, square design with a single power button on top, while the CT9500 features a larger LCD screen and a side-mounted battery compartment. Once you’ve identified your model, you’re halfway to a successful battery swap.

Knowing the Right Battery Model

Each Crosstour model uses a specific lithium-ion battery. Here’s a quick reference:

• CT7000 & CT8000: Uses the NP-F970 compatible 1050mAh battery
• CT8500 & CT9000: Uses the 3.7V 1200mAh Li-ion battery (model: CT-B120)
• CT9500 & CT10000: Uses the CT-B150 1500mAh battery

You can usually find this info printed on the battery itself or in the camera’s settings under “Battery Info.” If you’re buying a replacement, always double-check the model number. I once made the mistake of ordering a generic 1200mAh battery labeled “for Crosstour,” only to find it didn’t fit the CT9500’s compartment—lesson learned!

OEM vs. Third-Party Batteries: What to Choose?

You’ll find two types of replacement batteries: OEM (Original Equipment Manufacturer) and third-party (aftermarket). OEM batteries come directly from Crosstour or authorized partners and are guaranteed to fit and perform as expected. They’re more expensive but offer peace of mind.

Third-party batteries (like those from Wasabi Power, Kastar, or Powerextra) are often 30–50% cheaper and widely available. Many users report good performance, but quality varies. I’ve used a Kastar CT-B150 battery in my CT9500 for over a year with no issues, but a friend’s cheaper no-name battery overheated after two weeks.

Pro tip: If you go third-party, stick to reputable brands with high user ratings (4.5+ stars on Amazon or B&H). Avoid anything priced suspiciously low—it’s often a red flag for poor quality or counterfeit products.

Tools and Supplies You’ll Need for a Smooth Battery Swap

Essential Tools (Mostly Household Items)

Good news: you don’t need a toolkit full of specialized gear to change your Crosstour camera battery. Here’s what you’ll need:

• Replacement battery (matched to your model)
• Microfiber cloth (to clean the battery compartment)
• Plastic spudger or credit card (to gently pry open the battery door)
• Small Phillips-head screwdriver (only for models with screw-secured compartments, like older CT7000 units)
• Anti-static wrist strap (optional but recommended if you’re in a dry environment)

I keep a small pouch in my camera bag with these items. The microfiber cloth is especially useful—it removes dust and prevents scratches when handling the battery contacts.

Where to Buy Batteries and Accessories

Here are my go-to places for replacement parts:

• Amazon: Fast shipping, customer reviews, and easy returns. Search for “Crosstour CT-B150 battery” or your specific model.
• B&H Photo Video: Trusted by pros. Great for OEM batteries and chargers.
• Crosstour Official Store (on Amazon or their website): Best for authenticity, but often more expensive.
• eBay: Can be hit-or-miss. Only buy from sellers with 98%+ positive feedback.

I recommend buying at least two spare batteries if you’re planning a long trip. I once shot a 4-day backpacking trip with only one spare—ended up rationing footage to make it last!

Optional but Helpful Extras

These aren’t required, but they make life easier:

• Dual-battery charger: Lets you charge two batteries at once. I use a Kastar dual charger for my CT9500—saves time.
• Car charger: Handy for road trips. Plug it into your cigarette lighter and keep batteries topped up.
• Battery storage case: Prevents damage and keeps spares organized. I use a hard-shell case from JJC.

One thing I’ve learned: never store batteries loose in your backpack. They can short-circuit if they touch metal objects (like keys or coins). A simple plastic case or even a small ziplock bag works wonders.

Step-by-Step Guide: How to Change the Battery in Minutes

Step 1: Power Off and Prepare Your Workspace

Start by turning off your Crosstour camera. This prevents any accidental data corruption or short circuits. I always double-check by pressing the power button—no screen means it’s off.

Next, find a clean, well-lit workspace. A cluttered table can lead to dropped screws or lost batteries. I like to use a small towel to create a non-slip surface—especially helpful if you’re working on a countertop.

Step 2: Open the Battery Compartment

This is where models differ slightly:

• CT7000/CT8500: The battery door is on the side. Slide it downward to unlock, then pull it open.
• CT9000/CT9500/CT10000: The door is on the bottom. Press the small latch (usually a triangle icon) and slide the door to the side.

Use a plastic spudger or credit card to gently pry the door open if it’s stiff. Avoid metal tools—they can scratch the casing or damage the latch mechanism.

Pro tip: If the door feels stuck, don’t force it. Wiggle it slightly while applying gentle pressure. I once cracked a CT8500’s door by yanking too hard—now I’m much more careful!

Step 3: Remove the Old Battery

Once the compartment is open, you’ll see the battery. It’s usually held in place by a small plastic tab or spring clip. Gently lift the tab (if present) and slide the battery out.

Here’s a common mistake: trying to pull the battery straight up. Most Crosstour batteries are designed to slide out horizontally. Think of it like removing a drawer—pull it toward you, not up.

Before removing it, take a quick photo of the battery orientation with your phone. This ensures you insert the new one the right way around. The positive (+) and negative (-) symbols should face the same direction.

Step 4: Insert the New Battery

Take your new battery and align it with the compartment. Make sure the contacts (metal strips) match the ones inside the camera. Gently slide it in until it clicks into place.

If it doesn’t go in smoothly, don’t force it. Double-check the orientation and model. I once inserted a CT-B120 into a CT9500—it was slightly too small and rattled around, causing intermittent power issues.

Once inserted, press the battery gently to ensure it’s seated properly. You should feel a slight click or resistance.

Step 5: Close the Compartment and Power On

Slide or snap the battery door back into place. Make sure it’s fully closed—there should be no gaps. For models with screws (like older CT7000), tighten them just enough to secure the door. Overtightening can strip the threads.

Now, power on your camera. If the battery is properly seated, the screen should light up within 3–5 seconds. If it doesn’t, try these quick fixes:

• Remove and reinsert the battery.
• Check for dust or debris in the contacts (clean with a microfiber cloth).
• Try a different battery (if you have one).

Once it’s on, check the battery level in the settings. A full charge should show 100% or “Full.”

Maximizing Battery Life and Performance

Best Charging Practices

How you charge your battery affects its lifespan. Here’s what I’ve learned:

• Use the original charger or a reputable third-party one. Cheap chargers can overcharge or undercharge, reducing battery life.
• Don’t leave batteries charging overnight. Modern chargers have overcharge protection, but it’s better to be safe. I charge mine for 2–3 hours and unplug them.
• Charge at room temperature. Charging in extreme heat or cold can damage the battery. I keep my charger in a cool, dry drawer.

I once left a battery charging on a hot windowsill in summer. The casing warped slightly, and the battery life dropped by 20%. Now I charge everything indoors.

Storage Tips for Longevity

If you won’t use your camera for a while, store the batteries properly:

• Charge to 40–60% before storing. Storing at 100% or 0% accelerates degradation.
• Store in a cool, dry place. Avoid basements (too damp) and attics (too hot).
• Check every 3–6 months. Recharge to 50% if the level drops.

I store my spares in a plastic case with silica gel packets to absorb moisture. It’s simple but effective.

Extending Battery Life While Filming

Want to get the most out of each charge? Try these tricks:

• Lower the screen brightness. The LCD is a big power drain. I keep mine at 50% unless I’m filming in direct sunlight.
• Turn off Wi-Fi and GPS when not needed. These features constantly search for signals, using extra power.
• Use shorter recording times. If you’re just capturing quick clips, set the camera to auto-stop after 1–2 minutes.
• Carry a power bank. Some Crosstour models support USB charging while recording (check your manual). I use a 10,000mAh Anker power bank for all-day shoots.

Common Mistakes and How to Avoid Them

Using the Wrong Battery

This is the #1 mistake I see. A CT-B120 won’t fit a CT9500, and vice versa. Always double-check the model number. When in doubt, take a photo of your old battery and compare it with product listings.

Forcing the Battery Door

If the door won’t close, don’t force it. This usually means the battery isn’t seated properly. Remove it, check the orientation, and try again. Forcing it can crack the door or damage the latch.

Ignoring Battery Contacts

Dust, dirt, or corrosion on the contacts can prevent the camera from recognizing the battery. Clean them gently with a cotton swab and isopropyl alcohol if needed. I do this every few months, especially after dusty outdoor shoots.

Overlooking Firmware Updates

Sometimes, a camera won’t charge or recognize a new battery due to outdated firmware. Check Crosstour’s website for updates. I once had a CT8500 that wouldn’t charge a new battery—after updating the firmware, it worked perfectly.

Data Table: Crosstour Battery Comparison (2024)

Camera Model	Battery Model	Capacity (mAh)	Voltage (V)	Approx. Runtime (1080p)	Price Range (USD)
CT7000	NP-F970	1050	3.7	90–110 min	$15–$25
CT8500	CT-B120	1200	3.7	100–120 min	$18–$30
CT9500	CT-B150	1500	3.7	130–150 min	$22–$35
CT10000	CT-B150	1500	3.7	140–160 min	$22–$35

Note: Runtime varies based on settings (e.g., 4K vs. 1080p, Wi-Fi on/off).

Final Thoughts: Stay Powered, Stay Filming

Changing your Crosstour action camera battery doesn’t have to be a hassle. With the right battery, a few simple tools, and this guide, you can swap it out in under five minutes—even in the middle of an adventure. No more missing the perfect shot because your camera died.

Remember the key takeaways: know your model, use the correct battery, handle contacts with care, and store spares properly. And don’t forget to keep at least one extra battery charged and ready. I’ve learned that lesson the hard way—twice!

Your Crosstour camera is built for action, and so are you. By mastering the battery swap, you’re not just fixing a problem—you’re empowering yourself to capture every moment, no matter how wild the ride gets. So grab that spare battery, head out, and keep filming. The world is waiting to see what you create.

Frequently Asked Questions

How do I change the Crosstour action camera battery safely?

To safely change the Crosstour action camera battery, power off the device first. Open the battery compartment using the latch or sliding mechanism, remove the old battery, and insert the new one with the contacts aligned properly.

What type of battery does my Crosstour action camera use?

Most Crosstour action cameras use a rechargeable lithium-ion battery, such as the 1050mAh or 1350mAh model, depending on your specific camera version. Always check your user manual for the exact Crosstour action camera battery type.

How long does it take to replace a Crosstour action camera battery?

Changing the Crosstour action camera battery typically takes less than 2 minutes. Simply swap the depleted battery with a fully charged one, and you’re ready to resume recording.

Can I change the Crosstour action camera battery while it’s recording?

No, you should never change the battery while the camera is recording. Doing so may corrupt your footage or damage the device. Always stop recording and power off the camera first.

Where can I buy a replacement Crosstour action camera battery?

Replacement batteries are available on Crosstour’s official website, Amazon, or electronics retailers. Ensure you purchase the correct model number for your Crosstour action camera to guarantee compatibility.

Why won’t my Crosstour camera power on after a battery change?

If your camera doesn’t power on, double-check that the battery is fully charged and inserted correctly. If the issue persists, the battery or camera may have a fault—contact Crosstour support for further assistance.