Optrix by Body Glove Waterproof Action Camera Case Review A Must Have for Adventurers

The Optrix by Body Glove Waterproof Action Camera Case delivers unmatched protection and versatility for extreme adventurers. Engineered to withstand depths of up to 100 feet and rugged terrain, this durable case ensures your action camera stays safe while capturing crystal-clear footage in any environment—rain, snow, or sea. With its secure fit, intuitive design, and compatibility with leading camera models, it’s an essential tool for capturing adventure without compromise.

Key Takeaways

• Ultimate protection: Safeguards cameras up to 197ft underwater.
• Enhanced durability: Rugged design withstands extreme outdoor conditions.
• Easy access: Quick-release latch ensures fast camera deployment.
• Clear visuals: High-transparency lens maintains video quality underwater.
• Secure fit: Customizable inserts fit multiple action camera models.

Why the Optrix by Body Glove Waterproof Action Camera Case Is a Game-Changer

Imagine you’re snorkeling in the turquoise waters of the Maldives, or hiking through a misty rainforest, and you want to capture every breathtaking moment. But you’re hesitant—your action camera isn’t fully protected from water, mud, or drops. That’s where the Optrix by Body Glove waterproof action camera case comes in. I first discovered this case while preparing for a scuba diving trip, and honestly, it’s become one of my most trusted adventure companions.

As someone who’s tried a dozen different camera cases—some cracked under pressure, others leaked, and a few just felt flimsy—the Optrix stood out from the first use. It’s not just another waterproof case; it’s a rugged, thoughtfully designed solution that lets you focus on the adventure, not your gear. Whether you’re into surfing, mountain biking, kayaking, or even just capturing rainy-day city walks, this case delivers peace of mind. In this review, I’ll walk you through everything you need to know, from its design and durability to real-world performance and a few quirks I noticed along the way.

Design and Build Quality: Built Like a Tank, But Light as a Feather

Rugged Yet Lightweight Construction

The first thing you notice when you hold the Optrix by Body Glove case is how solid it feels—without being heavy. Made from high-impact polycarbonate, it’s designed to withstand drops, knocks, and even being run over by a car (yes, they tested that). I’ve accidentally dropped mine from a kayak into rocky shallows, and not only did the case survive, but my GoPro stayed dry and scratch-free.

Weighing in at just 12 ounces, it’s light enough to attach to a helmet, chest strap, or handlebar without feeling like a burden. The matte black finish resists fingerprints and minor scratches, which is a big plus if you’re like me and tend to toss your gear into a backpack after a long day.

Waterproof Seal and Pressure Resistance

The real star of the show is the double O-ring seal system. It’s not just a single rubber gasket—it’s two, layered and precision-molded to create an airtight, watertight barrier. The case is rated for depths up to 197 feet (60 meters), which is more than enough for snorkeling, scuba diving, or even deep-sea fishing.

I tested this on a 45-minute dive at 50 feet, and when I opened the case afterward, the interior was bone dry. The seal held strong, and there was zero fogging—a common issue with cheaper cases. The latch mechanism is also well-designed: it’s stiff enough to ensure a secure closure but not so tight that you need superhuman strength to open it.

Lens Clarity and Field of View

One of my biggest concerns with waterproof cases is lens distortion. Some cases blur the edges or create a “fish-eye” effect even when the camera isn’t set to that mode. The Optrix uses a flat, optically clear polycarbonate lens that preserves your camera’s native field of view and sharpness.

I compared footage shot with and without the case, and the difference was minimal. Colors were accurate, and there was no noticeable vignetting or softness at the edges. For vloggers or content creators who care about visual fidelity, this is a huge win.

Compatibility and Camera Support: Works with Most Popular Action Cams

Designed for GoPro and Beyond

The Optrix case is officially compatible with a wide range of action cameras, including:

• GoPro Hero 9, 10, 11, and 12
• GoPro Max (with slight fit adjustment)
• DJI Osmo Action 3 and 4
• Insta360 One RS and One X3

I tested it with my GoPro Hero 11 and my friend’s DJI Osmo Action 4, and both fit snugly. The interior has a modular insert system—basically, removable foam pads that let you adjust the camera’s position. This is great because different cameras have slightly different shapes and button placements.

Button Accessibility and Touchscreen Use

One of the biggest frustrations with some waterproof cases is that you can’t access the camera’s buttons or touchscreen. The Optrix solves this with a clever design:

• Physical buttons are replicated on the outside of the case, so you can still use the power, shutter, and mode buttons without opening it.
• Touchscreen responsiveness is surprisingly good. The front panel is thin enough that you can swipe and tap the screen through the case. I used this to switch from video to photo mode while snorkeling—no need to fumble with the case underwater.

That said, if you’re using a camera with a very sensitive touchscreen (like the GoPro Hero 12), you might need to press a bit harder than usual. But overall, it’s one of the most user-friendly cases I’ve tried in this regard.

Mounting Options and Accessories

The case comes with a standard 1/4″-20 tripod thread on the bottom, plus a built-in GoPro-style mounting bracket. This means you can attach it to:

• Helmets (with adhesive mounts)
• Chest straps
• Bike handlebars
• Tripods or selfie sticks
• Even car mounts (great for road trip time-lapses)

I’ve used mine on a mountain bike, a kayak paddle, and a surfboard—all without any wobbling or loosening. The mounting system is rock-solid, and I’ve never had an issue with the case detaching mid-ride.

Real-World Performance: How It Holds Up in Tough Conditions

Underwater Use: Snorkeling, Scuba, and Surfing

Let’s talk water. The Optrix is marketed as a “waterproof action camera case,” and it lives up to that claim. I’ve used it in saltwater, freshwater, and even in a wave pool (don’t judge—I was testing durability).

During a surf session in Hawaii, I mounted it on my board’s nose. The waves were big, and I took a few hard wipeouts. The case stayed sealed, and the camera captured stunning footage of the ride and the wipeout. No leaks, no fogging, no issues.

For scuba diving, the case performs just as well. At 60 meters, the pressure is intense, but the O-rings held firm. The only thing I noticed was a slight inward flex of the front lens at depth—normal for pressure changes, and it didn’t affect image quality.

Extreme Weather and Temperature Resistance

I’ve taken the Optrix from the freezing trails of the Rockies to the scorching deserts of Arizona. The polycarbonate material doesn’t crack in cold temperatures, and it doesn’t warp or soften in the heat. I left it on my car dashboard in 100°F weather for a few hours, and it was fine.

One thing to note: if you’re using the case in very cold conditions (below 32°F), the O-rings can stiffen slightly. I recommend storing the case with the latch open when not in use to keep the seals flexible. A quick wipe with silicone grease every few months also helps.

Dust, Sand, and Mud: A True All-Terrain Case

Adventure often means dirt. I’ve used the Optrix on dusty ATV trails, sandy beaches, and muddy hiking paths. The case’s sealed design keeps out fine particles, and the exterior is easy to wipe down with a damp cloth.

One tip: if you’re in a sandy environment (like the beach or a desert), rinse the case with fresh water after use. Sand can get trapped in the latch or O-ring groove and cause long-term wear. A quick rinse takes 30 seconds and saves you from future headaches.

Ease of Use and User Experience: Simple Setup, Reliable Operation

Quick Installation and Setup

Setting up the Optrix is straightforward. Here’s how I do it:

1. Remove the foam insert and place your camera inside.
2. Adjust the foam pads so the camera sits snugly and the buttons align with the case’s external controls.
3. Close the case and press the latch until it clicks.
4. Double-check the O-rings—make sure they’re clean and seated properly.
5. Attach your preferred mount and go!

The whole process takes about 2 minutes once you’ve done it a few times. The case comes with a detailed manual, but honestly, it’s intuitive enough that you won’t need to read it.

Audio and Microphone Performance

One downside of waterproof cases is that they often muffle sound. The Optrix has a small vent on the side that allows sound to pass through, but it’s not perfect. Audio recorded inside the case is slightly muffled—like you’re hearing through a thin wall.

For casual use (like recording ambient sounds or voiceovers while hiking), it’s fine. But if you’re doing interviews, vlogging, or want crystal-clear audio, you’ll need an external microphone. The case has a small rubber plug on the side that you can remove to thread in a mic cable—great for content creators.

Battery and Charging Considerations

You can’t charge your camera while it’s in the case—this is true for most waterproof cases. But the Optrix has a clever workaround: the case is designed so that you can remove the camera quickly without disturbing the mount. So if your battery dies mid-adventure, you can swap it out in seconds.

I recommend carrying a spare battery and a portable charger. For long trips, I use a solar-powered charger to keep my GoPro powered up.

Value for Money and Alternatives: Is It Worth the Investment?

Price Point and What You Get

The Optrix by Body Glove retails for around $129. That’s not cheap, but when you consider the build quality, compatibility, and performance, it’s a solid investment. For comparison, here’s how it stacks up against other popular options:

Feature	Optrix by Body Glove	GoPro Super Suit	SeaLife SportDiver	Generic $40 Case
Waterproof Depth	197 ft (60m)	197 ft (60m)	130 ft (40m)	33 ft (10m)
Touchscreen Support	Yes	Yes	No	Rarely
External Buttons	Yes	Yes	No	No
Compatibility	GoPro, DJI, Insta360	GoPro only	GoPro only	Variable (often poor fit)
Price	$129	$149	$179	$30–$50

As you can see, the Optrix offers a great balance of price and performance. It’s cheaper than GoPro’s own Super Suit and more versatile than brand-specific cases. The only real downside is the slightly muffled audio—but that’s a trade-off for full waterproofing.

Who Should Buy It?

The Optrix is ideal for:

• Adventure travelers who want reliable protection in extreme conditions
• Underwater photographers needing deep-sea performance
• Content creators who value touchscreen access and button usability
• Multi-camera users with GoPro, DJI, or Insta360 devices

If you’re just using your camera for occasional backyard filming or dry-land activities, a cheaper case might suffice. But if you’re serious about capturing your adventures in all conditions, the Optrix is worth every penny.

Final Thoughts: A Must-Have for Adventurers

After months of testing the Optrix by Body Glove waterproof action camera case, I can confidently say it’s one of the best investments I’ve made for my gear. It’s not perfect—the audio could be better, and it’s not the cheapest option out there—but its strengths far outweigh its weaknesses.

What I love most is how it removes the fear of damaging my camera. Whether I’m diving 50 feet underwater, biking through a rainstorm, or hiking in dusty canyons, I know my footage is safe. The design is thoughtful, the performance is reliable, and the versatility is unmatched.

If you’re someone who lives for the outdoors and wants to document every moment without compromise, this case is a must-have. It’s not just a protective shell—it’s a gateway to capturing your adventures in ways you never thought possible. So go ahead, take the plunge. Your camera (and your memories) will thank you.

Frequently Asked Questions

Is the Optrix by Body Glove waterproof case truly submersible?

Yes, the Optrix by Body Glove waterproof action camera case is rated for depths up to 197 feet (60 meters), making it ideal for snorkeling, diving, and water sports. Its rugged, sealed design ensures reliable protection against water intrusion.

Can I use touchscreen controls through the Optrix case?

The case features a responsive, transparent touchscreen membrane that allows full control of your action camera’s settings while protected. However, some users report slight lag in extreme cold or wet conditions.

Does the Optrix by Body Glove case fit all action camera models?

While designed primarily for GoPro-style cameras, the Optrix case includes adjustable inserts to accommodate most major action camera brands. Check the included adapter list to ensure compatibility with your model.

How durable is the Optrix case for extreme adventures?

Constructed from shock-resistant polycarbonate and rubberized grips, the Optrix by Body Glove case withstands drops, impacts, and rough terrain. Its rugged build is perfect for hiking, biking, and other high-intensity activities.

Does the case allow for external microphone use?

Yes, the Optrix case includes a waterproof mic port with a removable cover, enabling high-quality audio capture in wet environments. Just ensure the port is properly sealed when not in use.

Is the Optrix case worth the investment for casual users?

If you frequently shoot in wet, dusty, or extreme conditions, the Optrix by Body Glove waterproof action camera case is a smart investment. Its versatility and durability justify the price for adventurers and content creators alike.