Top Vivitar Action Camera 1080p Accessories for Stunning Shots

Maximize your Vivitar Action Camera 1080p’s potential with high-performance accessories designed for crystal-clear, dynamic footage in any environment. From rugged waterproof housings to stabilizing mounts and high-speed microSD cards, these essential add-ons ensure professional-quality shots whether you’re diving, biking, or hiking. Elevate your adventures with gear that delivers durability, clarity, and versatility.

Key Takeaways

• Upgrade your mounts: Use 360-degree swivel mounts for dynamic angles.
• Enhance audio: Attach an external mic for crystal-clear sound.
• Extend battery life: Carry spare batteries for longer shooting sessions.
• Stabilize footage: Add a tripod or stabilizer to reduce shaky videos.
• Protect your lens: Install scratch-resistant lens covers for durability.
• Optimize lighting: Use LED light attachments for low-light conditions.

Why the Right Accessories Matter for Your Vivitar Action Camera 1080p

You’ve got your Vivitar Action Camera 1080p in hand—compact, affordable, and ready to capture life’s wildest moments. But here’s the thing: no matter how capable your camera is, it can only do so much on its own. Think of it like a chef with a sharp knife but no cutting board, measuring spoons, or heat source. Without the right tools, even the best ingredients won’t turn into a great meal.

That’s where accessories come in. The Vivitar Action Camera 1080p accessories ecosystem is surprisingly robust, offering everything from mounts that let you film while biking, surfing, or skydiving, to external mics that clean up wind noise and make your vlogs sound pro. Whether you’re a weekend adventurer, a content creator, or just someone who loves documenting family hikes, the right add-ons can transform your footage from “meh” to “mind-blowing.”

I learned this the hard way during a recent mountain biking trip. I had my camera mounted on my helmet, but the wind noise was so bad I couldn’t hear myself narrating the ride. The footage looked great, but the audio was unusable. That’s when I realized: accessories aren’t just nice-to-haves—they’re essential for telling your story the way it deserves to be told. In this guide, I’ll walk you through the top Vivitar Action Camera 1080p accessories that’ll help you capture stunning, professional-quality shots—without breaking the bank.

Essential Mounts for Every Adventure

Mounts are the backbone of any action camera setup. Without them, your Vivitar 1080p is just a small, lonely device in your pocket. The right mount unlocks new angles, stabilizes your shots, and lets you film hands-free while doing what you love. Let’s break down the most useful and practical mounts you can pair with your camera.

Helmet Mounts: Your Go-To for First-Person POV

If you’re into biking, skiing, or skateboarding, a helmet mount is probably your first purchase. The Vivitar Helmet Mount Kit (often included in bundles) uses strong adhesive pads and a swivel arm to attach securely to most helmet types. I’ve used this on both a full-face mountain bike helmet and a snowboarding half-shell, and it held up perfectly—even during a wipeout on a black diamond run.

Pro tip: Clean the helmet surface with alcohol before applying the adhesive. This prevents peeling mid-ride, especially in cold or wet conditions. Also, position the mount slightly off-center to avoid blocking your peripheral vision.

The swivel arm lets you angle the camera up or down, which is great for adjusting your shot on the fly. One thing to note: the adhesive can lose grip after a few months, especially if exposed to extreme heat or moisture. I recommend checking it every few weeks and having a backup mount ready.

Chest Harness: The Secret to Stable, Dynamic Shots

While helmet mounts give you a “you-are-there” perspective, chest harnesses offer something different: stability. Because your chest moves less than your head, footage from a chest mount is often smoother and easier to watch. This is ideal for hiking, trail running, or even filming kids at the playground.

The Vivitar Chest Harness is lightweight, adjustable, and fits most body types. It uses a quick-release plate that snaps onto your camera—no tools needed. I used it during a 10-mile forest hike, and the footage was so stable I almost forgot I was filming. It also gives a lower angle, which can make landscapes feel more immersive.

One minor downside: if you’re wearing a backpack, the harness straps might rub against it. I solved this by loosening the side straps slightly and adjusting the camera position. Also, avoid wearing it over thick winter layers—the fit gets too loose.

Suction Cup Mount: For Cars, Boats, and Smooth Surfaces

Want to film your car chase scene? Or capture the view from the front of a speedboat? A suction cup mount is your best bet. Vivitar’s 3.5-inch suction cup mount uses industrial-grade rubber and a lever-lock system for a strong, vibration-resistant grip.

I tested this on my sedan’s windshield during a road trip, and it held steady at speeds up to 75 mph—even over potholes. Just make sure the surface is clean and dry before attaching. A quick wipe with a microfiber cloth does the trick.

Important: Suction cups can fail in extreme temperatures. Avoid leaving the camera mounted in direct sunlight for hours, especially in summer. The heat can soften the rubber and cause it to detach. Also, never use this on textured or matte surfaces—it won’t stick.

Handlebar and Roll Bar Mounts: For Bikes, ATVs, and More

If you’re into cycling, motocross, or off-roading, a handlebar mount is a must. Vivitar’s version clamps securely to bars between 0.75 and 1.5 inches in diameter. It’s made of durable plastic with rubber padding to prevent scratches.

I used this on my mountain bike during a trail ride. The mount stayed put, even over rocky terrain. The 360-degree swivel let me adjust the camera from forward-facing to rear-view in seconds. One tip: tighten the clamp with a wrench, not just by hand. A loose mount can vibrate and blur your footage.

For ATVs or roll cages, the same mount works great—just make sure the bar diameter fits. If not, consider a third-party adapter or a universal ball mount for more flexibility.

Audio Upgrades: Clear Sound, Less Wind Noise

Let’s be honest: the built-in mic on the Vivitar Action Camera 1080p isn’t terrible, but it’s not great either. In windy conditions or loud environments, your audio can sound muffled, distant, or full of static. That’s why upgrading your audio setup is one of the smartest moves you can make.

External Microphones: The Game-Changer You Didn’t Know You Needed

Adding an external mic can dramatically improve your sound quality. The Vivitar External Microphone (model VX-EMIC) plugs into the camera’s 3.5mm audio port and features a noise-reducing capsule with a windscreen. I used this during a beach vlog, and the difference was night and day—no more “whoosh” every time the wind blew.

The mic is omnidirectional, meaning it picks up sound from all around. This is great for interviews or ambient noise, but not ideal if you’re trying to isolate a specific voice. For vlogging, I recommend holding the mic close (about 6–8 inches from your mouth) and speaking clearly.

Pro tip: Always test your audio before recording. Use the camera’s preview screen to check levels. If the audio is too quiet, move the mic closer or speak louder. If it’s clipping (distorting), back off slightly.

One limitation: the mic is wired, so you’ll need to manage the cable. I use a small velcro strap to keep it tidy and prevent it from swinging into the frame. Also, the 3.5mm port is on the side of the camera, so plan your mounting accordingly.

Deadcat Wind Mufflers: When the Wind Won’t Quit

Even with an external mic, wind can be a nightmare. That’s where a deadcat (a furry windscreen) comes in. Vivitar doesn’t sell one directly, but third-party options like the Fotodiox Deadcat fit perfectly over the external mic.

I used this combo during a windy hike in the Rockies. The deadcat reduced wind noise by at least 70%, turning what would’ve been unusable audio into something crisp and clear. It’s not magic, but it’s close.

Just remember: deadcats add bulk, so make sure your camera case or housing has enough space. Also, they can pick up dirt and moisture—wipe them down after use and store them in a dry place.

Audio Recording Tips for Action Shots

Here are a few quick tips to get the best sound from your setup:

• Record in quiet moments: If you’re filming a loud activity (like a motocross race), narrate during breaks or use voiceovers in post.
• Use a lavalier mic: For interviews or vlogging, a clip-on mic (like the BOYA BY-M1) gives even better clarity than an external mic.
• Monitor with headphones: Plug in a pair of 3.5mm headphones to check audio in real time. This helps you catch issues before you’ve recorded 10 minutes of bad sound.

And if you’re editing in post, tools like Audacity (free) or Adobe Audition can remove background noise and boost voice levels. But nothing beats getting it right the first time.

Battery and Power Solutions: Never Run Out of Juice

Action cameras are power-hungry, especially when recording 1080p at 60fps. The Vivitar 1080p’s battery lasts about 90 minutes under normal use—plenty for a short ride, but not enough for a full day of filming. That’s why extra batteries and power options are essential.

Extra Batteries: Always Have a Spare

The Vivitar 1080p uses a 1050mAh rechargeable lithium-ion battery (model VB-1050). I always carry two spares in my camera bag. Swapping them out takes less than 30 seconds, and it means I can film all day without stress.

Pro tip: Label your batteries with tape or a marker (e.g., “Spare 1,” “Spare 2”) so you know which ones are charged. Nothing’s worse than reaching for a battery only to find it’s dead.

One thing to note: third-party batteries are cheaper, but they’re not always reliable. I tried a generic brand once, and it only held 60% charge. Stick with Vivitar or reputable brands like Wasabi Power for best results.

USB Battery Packs: Power on the Go

If you’re filming for hours, a USB battery pack can keep you going. The Vivitar 1080p charges via micro-USB, so any standard power bank will work. I use a 10,000mAh pack from Anker, which gives me about 4 extra charges.

Just remember: you can’t record while charging. The camera needs to be powered off. But you can charge it during breaks, then swap in a fresh battery when you’re ready to roll.

Best practice: Use a battery pack with at least 2.1A output for faster charging. Also, keep the pack in a dry, shaded spot—heat kills battery life.

Car Charger and Wall Adapter: For Long Trips

On road trips, I use a dual-port USB car charger to juice up my batteries while driving. Vivitar sells a car adapter, but any 12V USB charger will do. Pair it with a wall adapter for home charging—this lets you charge multiple batteries overnight.

I keep a charging station on my desk with labeled slots for each battery. It’s simple, but it saves so much time.

Protective Cases and Housings: Keep Your Camera Safe

The Vivitar 1080p is tough, but it’s not indestructible. A good case or housing protects it from drops, water, and dust—so you can focus on filming, not worrying.

Waterproof Housing: For Underwater Adventures

The Vivitar Waterproof Housing is rated to 100 feet (30 meters), making it perfect for snorkeling, kayaking, or rainy days. I used it during a scuba diving trip in Cozumel, and the footage was crystal clear—no fog, no leaks.

The housing has a flat glass port that minimizes distortion. But it can pick up scratches, so always rinse it with fresh water after use and store it in a soft case.

One downside: the buttons are stiff, so you’ll need to press firmly. Practice opening and closing it before your trip.

Hard Case: For Travel and Storage

For transport, a hard case like the Vivitar Action Case keeps your camera and accessories safe. It has customizable foam inserts, so you can fit your camera, mounts, and batteries neatly.

I use this for flights and long drives. It’s TSA-friendly and fits under airplane seats. The only con: it’s a bit bulky for day hikes. For that, I switch to a small padded camera bag.

Lens Protectors: Prevent Scratches

The camera’s lens is exposed, so it’s prone to scratches. A simple lens protector (like the Kuvrd Screen + Lens Protector) can save you from costly repairs. It’s thin, clear, and easy to install.

I’ve dropped my camera a few times, and the protector took the hit—not the lens. Worth every penny.

Lighting and Creative Accessories: Elevate Your Shots

Great footage isn’t just about the camera—it’s about light, angles, and creativity. These accessories help you go beyond basic point-and-shoot.

LED Video Lights: For Low-Light Filming

The Vivitar 1080p struggles in dim light. A small LED light (like the Neewer 660 LED Panel) fixes that. I use it for night biking and indoor vlogs. It clips onto your helmet or handlebar and runs on AA batteries.

Tip: Use a diffuser or bounce card to avoid harsh shadows. And don’t point it directly at the camera—it’ll wash out your shot.

Selfie Sticks and Extension Poles

For group shots or wide-angle selfies, a selfie stick is handy. Vivitar’s version extends to 3 feet and has a wrist strap. I use it for beach photos and hiking group shots.

Just be careful in windy conditions—long poles can act like sails and shake your camera.

Filters and Lenses

While the Vivitar 1080p doesn’t support interchangeable lenses, you can add clip-on filters. A polarizing filter reduces glare on water, and a neutral density (ND) filter helps with bright daylight.

I use a Freewell Magnetic ND Filter for sunrise shots. It’s quick to attach and makes colors pop.

Accessory Comparison Table

Accessory	Best For	Pros	Cons
Helmet Mount	First-person POV	Secure, adjustable, included in bundles	Adhesive can wear out
Chest Harness	Stable, immersive shots	Less shaky, good for hiking	Can rub with backpacks
External Mic	Clear audio	Reduces wind noise, easy to use	Wired, needs cable management
Waterproof Housing	Underwater filming	100ft depth rating, durable	Buttons can be stiff
Extra Battery	Long filming sessions	Quick swap, reliable	Third-party options may underperform
LED Light	Low-light conditions	Portable, bright	Battery-powered, can create harsh light

Final Thoughts: Build Your Perfect Kit

Your Vivitar Action Camera 1080p is a capable tool, but it’s the accessories that unlock its full potential. Whether you’re chasing adrenaline on a mountain bike, exploring underwater reefs, or just documenting everyday moments, the right gear makes all the difference.

Start with the basics: a helmet or chest mount, an extra battery, and a waterproof housing. Then, as you grow, add audio upgrades, lighting, and creative tools. Don’t feel pressured to buy everything at once. Build your kit slowly, based on what you actually use.

And remember: the best accessory is your own creativity. A simple selfie stick or a deadcat can turn a boring shot into something unforgettable. So get out there, experiment, and most importantly—have fun. Because every great shot starts with a moment you wanted to capture. And now, with the right Vivitar Action Camera 1080p accessories, you’ll be ready for it.

Frequently Asked Questions

What are the must-have Vivitar Action Camera 1080p accessories for beginners?

Essential Vivitar Action Camera 1080p accessories include a waterproof case (for depths up to 30m), a head strap mount, and a 32GB microSD card. These ensure protection, stable hands-free recording, and ample storage for high-resolution footage.

Can I use third-party mounts with my Vivitar 1080p action camera?

Yes, most third-party mounts with a standard GoPro-style interface are compatible with Vivitar 1080p action cameras. Just verify the mount’s connection type matches your camera’s design for secure attachment during activities.

How does the Vivitar Action Camera 1080p battery performance hold up with frequent use?

The stock battery lasts about 90 minutes per charge, but carrying spare batteries (sold separately) is recommended for extended shoots. Consider high-capacity third-party batteries as a budget-friendly Vivitar 1080p accessory.

What type of memory card works best with the Vivitar 1080p action camera?

Use Class 10 or UHS-I microSD cards (32GB–64GB) for optimal performance with the Vivitar 1080p camera. Higher speeds prevent lag during 1080p/60fps recording and ensure smooth file transfers.

Are there any wireless accessories compatible with the Vivitar Action Camera 1080p?

Yes, Bluetooth remotes and Wi-Fi-enabled smartphone apps let you control the camera remotely. These Vivitar 1080p accessories are great for group shots or hard-to-reach angles without touching the device.

Which protective accessories are best for extreme sports with my Vivitar camera?

For extreme sports, pair a rugged waterproof case with a floating hand grip and anti-scratch lens cover. These Vivitar Action Camera 1080p accessories shield against impacts, water, and debris during high-intensity activities.