Xtreme Action View Sunglasses Camera Replacement Battery Guide

Never miss a moment with the right replacement battery for your Xtreme Action View Sunglasses Camera—ensuring uninterrupted recording during high-adrenaline adventures. Compatible, long-lasting power solutions are essential to keep your action cam sunglasses running at peak performance, whether you’re hiking, biking, or capturing extreme sports. Choose wisely to maximize uptime and video quality.

Key Takeaways

• Use OEM batteries: Always choose original Xtreme Action View replacement batteries for optimal performance.
• Check voltage: Ensure the replacement battery matches the 3.7V requirement to avoid damage.
• Handle with care: Avoid bending or puncturing the battery during installation to prevent hazards.
• Charge fully: New batteries require a full charge before first use for extended life.
• Store properly: Keep unused batteries in a cool, dry place to maintain longevity.
• Dispose responsibly: Recycle old batteries at certified e-waste centers to protect the environment.

Why Your Xtreme Action View Sunglasses Need a Fresh Battery

Let’s be honest: few things are as frustrating as grabbing your trusty Xtreme Action View Sunglasses for a weekend adventure, only to find the camera dead because the battery gave up. You’re standing on a mountain ridge, about to capture that jaw-dropping sunset, and *click*—nothing. The lens stays dark, and your heart sinks. I’ve been there. That moment taught me a valuable lesson: the camera’s battery isn’t immortal. And when it dies, you can’t just toss the whole thing. The good news? Replacing the battery in your Xtreme Action View sunglasses camera isn’t as scary as it sounds. In fact, it’s one of those small DIY wins that feels surprisingly satisfying.

These sunglasses aren’t just a pair of shades with a camera slapped on. They’re a compact, rugged tool designed for action—whether you’re mountain biking, skiing, surfing, or just capturing your dog’s hilarious antics at the park. But like any gadget, they rely on power. And when the battery fades, the magic fades with it. The key is knowing how to replace it properly, safely, and without turning your $200 investment into a paperweight. In this guide, I’ll walk you through everything you need to know about the Xtreme Action View sunglasses camera replacement battery—from spotting the signs of a dying battery to choosing the right replacement and installing it like a pro.

How to Know When It’s Time to Replace the Battery

Signs Your Camera Battery Is Fading

Before you start prying open your sunglasses, it’s important to confirm that the battery is actually the culprit. Sometimes, the issue is software-related, a loose connection, or even dirt in the charging port. But if you’ve tried charging for over 4 hours and the camera still won’t power on, or if it shuts off mid-recording, the battery is likely on its last legs.

• Short runtime: If your camera used to last 60–90 minutes and now dies after 10–15, the battery is degrading.
• Inconsistent power: The camera powers on, but shuts down unexpectedly, even with a full charge.
• No LED response: When you plug in the charging cable, the indicator light doesn’t turn on or blinks erratically.
• Slow charging: Takes much longer than usual to reach “full,” or never reaches it.
• Physical swelling: In rare cases, lithium-ion batteries swell. If the frame feels tight or the lens housing is bulging, stop using it immediately—this is a fire hazard.

Common Misdiagnoses to Avoid

I once spent an entire evening trying to “fix” my camera, only to realize the micro-USB port was full of pocket lint. Before assuming the battery is dead, check these:

• Clean the charging port: Use a dry toothbrush or compressed air to remove dust, sand, or debris.
• Try a different cable and charger: Not all USB cables are created equal. A faulty cable can mimic battery failure.
• Reset the camera: Some models have a tiny reset button under the battery cover. Press it with a paperclip for 10 seconds.
• Update firmware: Check the manufacturer’s website for firmware updates. A glitchy update can cause power issues.

Once you’ve ruled out these common issues, it’s time to consider a battery replacement. And trust me, it’s better than buying a whole new pair of sunglasses.

Choosing the Right Replacement Battery: What You Need to Know

Understanding the Original Battery Specs

The Xtreme Action View sunglasses camera typically uses a small, custom-shaped lithium-ion battery. While the exact model may vary slightly between versions (e.g., Gen 1 vs. Gen 2), most use a **3.7V, 350–500mAh** battery with a **JST PH 2.0mm connector**. This isn’t a standard AA or 9V battery—you can’t just grab one from your remote control. You need a compatible replacement.

Here’s what to look for:

• Voltage: Must be 3.7V. Using a higher voltage can fry the camera’s circuit board.
• Capacity (mAh): Aim for 350–500mAh. Higher mAh means longer runtime, but don’t go over 600mAh—it may not fit or could strain the charging circuit.
• Connector type: The JST PH 2.0mm is tiny and specific. A mismatch means you’ll have to solder, which we’ll cover later.
• Size and shape: Measure your old battery. It’s usually around 25mm x 15mm x 5mm. A slightly larger battery might not fit in the frame.

Where to Buy a Reliable Replacement

You’ve got options—but not all are equal.

• Official manufacturer (if available): The safest bet, but Xtreme doesn’t always sell replacement batteries directly. Check their website or contact support.
• Reputable third-party vendors: Look for sellers on Amazon, eBay, or specialty electronics sites like Adafruit or SparkFun with high ratings (4.5+ stars) and reviews mentioning “Xtreme Action View.”
• Generic battery packs with JST connectors: You can buy a 3.7V 500mAh lithium-ion pack and trim the wires to fit. Just ensure the connector matches.
• Local electronics stores: Some repair shops stock small lithium batteries and can help you find a match.

Pro tip: When buying online, search for “Xtreme Action View sunglasses camera replacement battery” or “3.7V 500mAh JST PH 2.0mm lithium-ion battery.” Avoid listings that just say “for action cameras” without model specifics.

DIY vs. Pre-Soldered Batteries

You’ll find two types of replacements:

• Pre-soldered batteries: These come with the correct connector already attached. Ideal if you’re not comfortable with a soldering iron. They’re slightly more expensive but save time and risk.
• Raw battery cells: You get just the battery and must solder the connector yourself. Cheaper, but requires basic electronics skills. If you’ve never soldered, watch a few YouTube tutorials first.

I went the pre-soldered route for my first replacement. It cost $12 more, but I avoided the stress of melting the circuit board. For my second pair, I tried soldering—and it worked fine, but I used a heat sink to protect the wires.

Step-by-Step Guide to Replacing the Battery

Tools and Supplies You’ll Need

Before you start, gather these items:

• Small Phillips-head screwdriver (usually #0 or #00)
• Plastic pry tool (or a guitar pick)
• Tweezers (for handling tiny connectors)
• Replacement battery (with correct specs and connector)
• Isopropyl alcohol and cotton swabs (for cleaning)
• Optional: Soldering iron, heat shrink tubing, heat sink (if modifying the connector)

Work in a well-lit area with a clean surface. I use a microfiber cloth to prevent scratches and keep screws from rolling away.

Opening the Sunglasses Frame

This is the trickiest part. The Xtreme Action View sunglasses are sealed tightly to protect against water and dust. Don’t force anything.

1. Remove the screws: Look for tiny screws near the hinge or camera housing. Use the right-sized screwdriver—don’t strip them.
2. Use the pry tool: Gently slide it around the seam where the frame meets the camera module. Apply even pressure. You’ll hear small *clicks* as clips release.
3. Open slowly: Once the frame is loose, don’t yank it. The battery is connected by a thin ribbon cable or wires. Lift the frame just enough to see the battery compartment.

My mistake: I once used a metal screwdriver to pry open the frame. It scratched the lens and bent a clip. Plastic tools only!

Removing the Old Battery

Now comes the delicate part.

• Unplug the connector: The battery is usually connected via a small plug. Use tweezers to gently lift the connector straight up. Don’t pull the wires.
• Peel off adhesive: Most batteries are glued in with double-sided tape. Carefully slide a plastic tool under one corner and lift. If it’s stubborn, use a hairdryer on low heat for 30 seconds to soften the glue.
• Inspect the contacts: Check the circuit board for corrosion or dirt. Clean with isopropyl alcohol and a cotton swab if needed.

Installing the New Battery

Time to reverse the process.

• Plug in the new battery: Align the connector with the socket and press it down firmly. You should feel a click.
• Secure the battery: Use new double-sided tape (or a small drop of non-conductive glue) to hold the battery in place. Avoid covering the charging port or lens.
• Reassemble the frame: Align the clips and gently press the frame back into place. Reinsert the screws and tighten them just enough—don’t over-torque.

Before closing completely, test the camera! Plug in the charger and check if the LED lights up. Power it on and record a 10-second clip. If it works, seal it up.

Maximizing Battery Life and Performance After Replacement

Charging Best Practices

A new battery won’t last long if you abuse it. Here’s how to keep it healthy:

• Use the right charger: A 5V/1A USB charger is ideal. Avoid fast chargers or car chargers with high output.
• Charge to 80–90%, not 100%: Lithium-ion batteries degrade faster at full charge. Unplug when it hits 90%.
• Don’t deep discharge: Recharge before the battery drops below 20%. Letting it hit 0% repeatedly shortens lifespan.
• Store at 50% charge: If you won’t use the sunglasses for weeks, charge to 50% before storing.

Usage Tips to Extend Runtime

Even a fresh battery won’t last forever. Use these tricks to get the most out of it:

• Turn off Wi-Fi/Bluetooth: If your model has wireless features, disable them when not needed.
• Lower video resolution: 1080p uses less power than 4K. For casual use, 720p is fine.
• Use burst mode: Instead of recording long clips, take short bursts. Less heat = less battery drain.
• Keep it cool: Don’t leave the sunglasses in direct sunlight or a hot car. Heat kills batteries.

When to Expect a Second Replacement

Most lithium-ion batteries last 2–3 years with regular use. After that, capacity drops to 70–80%. If your replacement is from a reputable brand, you can expect similar lifespan. But if you’re a daily user, plan for a second replacement in 18–24 months.

Battery Replacement Cost Comparison and Value Table

Is replacing the battery worth it? Let’s break it down.

Option	Cost	Pros	Cons
Replace Battery (DIY)	$15–$30	Cheapest option, extends life, eco-friendly	Requires time/skill, risk of damage
Send to Manufacturer	$50–$80 (including shipping)	Professional repair, warranty possible	Expensive, long wait times (2–4 weeks)
Buy New Sunglasses	$180–$250	Latest features, full warranty	Wastes old frame, not cost-effective
Use External Power Bank	$20–$40 (for power bank)	No surgery needed, portable	Bulky, not waterproof, messy cables

For most users, DIY battery replacement is the sweet spot. It’s affordable, keeps your favorite sunglasses alive, and feels like a small victory. I’ve replaced batteries in two pairs and saved over $300 compared to buying new.

Final Thoughts: Keep Your Adventure Rolling

Let’s circle back to that mountain ridge. After replacing the battery in my Xtreme Action View sunglasses, I stood there again—this time, camera ready. The sunset was just as breathtaking, and I captured every golden moment. That’s the real value of this guide: not just saving money, but preserving the joy of capturing life’s best moments.

Replacing the Xtreme Action View sunglasses camera replacement battery isn’t about being a tech genius. It’s about patience, attention to detail, and a willingness to try. Yes, it’s a little fiddly. Yes, you might drop a screw. But once you’ve done it, you’ll realize: this isn’t rocket science. It’s just care.

And here’s the best part: you’re not just fixing a gadget. You’re reducing e-waste, extending the life of a tool that’s been with you on countless adventures, and proving that with a little effort, we don’t have to throw things away just because one part fails. Whether you’re a DIY newbie or a seasoned tinkerer, this project is doable, rewarding, and absolutely worth it.

So, the next time your camera dies, don’t toss the sunglasses. Grab a screwdriver, a new battery, and give it another shot. Your future self—standing on another ridge, camera rolling—will thank you.

Frequently Asked Questions

What type of battery does the Xtreme Action View Sunglasses Camera use?

The Xtreme Action View Sunglasses Camera typically uses a rechargeable lithium-ion battery, often a 3.7V model. Check your device’s manual to confirm the exact specifications before purchasing a replacement.

Where can I buy an Xtreme Action View Sunglasses Camera replacement battery?

You can purchase a compatible replacement battery from the manufacturer’s website, electronics retailers like Amazon or Best Buy, or specialty stores that carry camera accessories. Ensure the battery matches your model’s requirements.

How do I replace the battery in my Xtreme Action View Sunglasses Camera?

To replace the battery, carefully remove the sunglasses’ casing using a small screwdriver, then disconnect the old battery and connect the new one. Follow the step-by-step guide in your user manual to avoid damaging internal components.

How long does the replacement battery last for the Xtreme Action View Sunglasses Camera?

A fully charged replacement battery typically lasts 1-2 hours of continuous recording, depending on usage and video resolution. Battery life may vary slightly based on environmental conditions and settings.

Are third-party batteries safe for my Xtreme Action View Sunglasses Camera?

Third-party batteries can be safe if they meet the original manufacturer’s specifications (voltage, capacity, and connector type). However, always buy from reputable brands to avoid potential damage or safety risks.

Why isn’t my Xtreme Action View Sunglasses Camera holding a charge after replacement?

If the new battery isn’t holding a charge, ensure it’s fully seated and properly connected. If issues persist, the charging port or internal circuitry may be faulty—contact the manufacturer for further assistance.